Routine maintenance of winding machine
Release time:
2023-11-02
To ensure the normal operation of a winding machine, daily inspection and correct operation are indispensable and important steps. First of all, the equipment manual should be established for daily recording and reading of the operation situation and existing problems of the winding machine. When starting work, the workbench, the cable guide rail and the main sliding surfaces should be carefully checked. If there are obstacles, tools, impurities, etc., they must be cleaned, wiped clean and oiled. Carefully check whether the equipment moving mechanism has new pulling, grinding and bumping injuries. If there are any, inform the equipment personnel to check whether the analysis is caused by failure, and make good records.
To ensure the normal operation of a winding machine, daily inspection and correct operation are indispensable and important steps. First of all, the equipment manual should be established for daily recording and reading of the operation situation and existing problems of the winding machine. When starting work, the workbench, the cable guide rail and the main sliding surfaces should be carefully checked. If there are obstacles, tools, impurities, etc., they must be cleaned, wiped clean and oiled. Carefully check whether the equipment moving mechanism has new pulling, grinding and bumping injuries. If there are any, inform the equipment personnel to check whether the analysis is caused by failure, and make good records.
Daily maintenance winding machine to do:
1, check the safety protection, power supply, limit and other devices should be complete and intact.
2, check the electrical distribution box should be closed firmly, electrical grounding is good.
3. Check whether the accessories of the equipment are in good condition. The thread passing wheel, felt clamp, thread release device and ceramic parts shall be complete and in good condition, and installed correctly. The idle running test run shall be used to observe whether the operation is stable and whether there is abnormal noise, etc.
1. basic maintenance:
1. To ensure the safety of maintenance work, please turn off the machine and unplug the power cord before maintenance;
2. When the daily winding machine is working, it is not allowed to open the sheet metal and doors of various parts;
3. Do not use compressed air to clean the machine and other components;
4. Do a good job in the anti-rust maintenance measures of the transmission part. During special holidays, if the machine does not work for a long time, it is necessary to do a good job in spot inspection and maintenance.
Related News
National Service Hotline
No.7, Science and Technology 1st Road, Gangwan Avenue, Tangjiawan Town, High-tech Zone, Xiangzhou District, Zhuhai City, Guangdong Province
公众号
抖音号
SEOTechnical Support:www.300.cn
SAF Coolest v1.2 设置面板 ZBUSX-ZWDY-NVAFE-ZAD
无数据提示
Sorry, the current column has no content for the time being.!
You can view other columns or returnHome Page