Operation method of 8 spindle winding machine
Release time:
2022-07-28
Before using the 8-spindle winding machine, you need to plug the machine into the power source, press the power button, and wait for the machine to start the self-check program until the machine displays normal working status. The preheating time is generally 10-15 minutes, and it can be officially put into use after the temperature is stable.
First, start warming up.
Before using the 8-spindle winding machine, you need to plug the machine into the power source, press the power button, and wait for the machine to start the self-check program until the machine displays normal working status. The preheating time is generally 10-15 minutes, and it can be officially put into use after the temperature is stable.
2. route selection
In the use of the 8-spindle winding machine, it is necessary to select different wires according to different winding requirements. Common wires include aluminum wire, copper wire, stainless steel wire, etc., and their specifications can also be selected according to specific needs. After the wire is selected, it needs to be placed on the wire tray and fed into the machine through the wire transmission system at the front of the machine.
3. positioner adjustment
The 8-spindle winding machine has multiple positioners to control the speed and angle changes of the wire during the winding process. Before the winding operation, each positioner needs to be adjusted according to the specific situation. The specific adjustment method is to first put the machine in manual mode, and then set and modify the parameters through the adjustment buttons on the control panel until the demand is met.
4. start winding
When the machine is adjusted and the wire has been placed on the wire tray, the winding operation can be started. First, you need to switch the machine to automatic mode, and then set it through the program setting function on the control panel. Program settings include winding path, winding speed, winding angle, etc. The specific setting can be adjusted according to the winding needs.
5. monitoring winding
During the winding operation of the machine, the winding status needs to be continuously monitored to ensure that the winding quality meets the requirements. If deviation or wire distortion is found, the inspection and adjustment should be stopped in time.
6. end winding
After the winding is completed, the wire must be cut off first, then the winding product is taken out, and the quality is checked. If problems are found, the machine can be adjusted and rewound.
7. Power off
After use, the power of the machine must be cut off and cleaned and maintained. Cleaning and maintenance of the machine can extend the service life of the machine and ensure better results in the next use.
Related News
National Service Hotline
No.7, Science and Technology 1st Road, Gangwan Avenue, Tangjiawan Town, High-tech Zone, Xiangzhou District, Zhuhai City, Guangdong Province
公众号
抖音号
SEOTechnical Support:www.300.cn
SAF Coolest v1.2 设置面板 ZBUSX-ZWDY-NVAFE-ZAD
无数据提示
Sorry, the current column has no content for the time being.!
You can view other columns or returnHome Page