Two Methods of coil Winding for Fully Automatic Winding Machine
Release time:
2023-12-06
There are two methods for the process of winding the coil of the full-automatic winding machine on the production line. In order to make the winding neat and regular, the full-automatic winding machine also has the plastic film clip pressed with the wire slot in advance to be padded on the iron core and then wound. The advantage of the semi-automatic automatic winding machine is that the manual can actively adapt to the enameled wire of different wire diameters, but the disadvantage is that the coil is loose and the volume is slightly larger.
There are two methods for the process of winding the coil of the full-automatic winding machine on the production line. In order to make the winding neat and regular, the full-automatic winding machine also has the plastic film clip pressed with the wire slot in advance to be padded on the iron core and then wound. The advantage of the semi-automatic automatic winding machine is that the manual can actively adapt to the enameled wire of different wire diameters, but the disadvantage is that the coil is loose and the volume is slightly larger.
The working process of the full-automatic winding machine is as follows: there is a thread storage wheel with a split pin on the full-automatic winding machine, remove the split pin to set the iron core from the opening and align the center of the inner ring of the iron core with the circumference of the thread storage wheel, close the split pin to store a proper amount of thread on the thread storage wheel, and then use the stored thread to wind the iron core. Whether the winding process is correct or not determines whether the automatic winding machine can normally wind the coil. An excellent winding process can provide processing efficiency.
Reduce the loss of wire, on the contrary, a wrong winding process makes the coil wound by the full-automatic winding machine not meet the design requirements. The full-automatic winding machine needs to use wire and skeleton during operation. The normal supply of power is also very important. In the use environment with large voltage fluctuation, the full-automatic winding machine will have abnormal temperature rise, overheating and abnormal electrical control system. The full-automatic winding machine controller is a very precise control system, it has higher requirements for power supply. Conditional customers should have a dedicated line circuit for power supply, and the circuit terminal should be equipped with a voltage regulator.
The use of materials on the normal work of the automatic winding machine plays a very important role, inferior enameled wire will cause the line is not neat, deformation of the skeleton will make the automatic winding machine in the winding spindle shaking, edge overlap line and other issues.
Related News
National Service Hotline
No.7, Science and Technology 1st Road, Gangwan Avenue, Tangjiawan Town, High-tech Zone, Xiangzhou District, Zhuhai City, Guangdong Province
公众号
抖音号
SEOTechnical Support:www.300.cn
SAF Coolest v1.2 设置面板 ZBUSX-ZWDY-NVAFE-ZAD
无数据提示
Sorry, the current column has no content for the time being.!
You can view other columns or returnHome Page